Kia Niro: Airbag Module / Curtain Airbag (CAB) Module Description and operation
| Description |
Curtain airbags are installed inside the headliner (LH and RH) and protect the driver and passenger from danger when side crash occurs. The SRSCM determines deployment of curtain airbag by using side impact sensor (SIS) signal.
Never attempt to measure the circuit resistance of the airbag module even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury. |
Side Airbag (SAB) Module Repair procedures
Removal
The side airbag cannot be disassembled from the seat back assembly, so
replace the seat back assembly whe ...
Curtain Airbag (CAB) Module Components and components location
Components
1. Curtain Airbag (CAB)
...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Rear Wiper Motor Repair procedures
Inspection
Rear Wiper Motor
1.
Remove the connector from the rear wiper motor.
2.
Connect positive (+) battery cables to terminal 4 and negative (-) battery
cables to terminal 3 respectively.
3.
Check that the motor ...
Kia Niro 2017 (DE HEV) Service Manual: Rear Seat Belt Buckle Repair procedures
Replacement
When installing the belt, be careful not to damage the retractor.
1.
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
...