Kia Niro: Air bag - supplemental restraint system / Curtain air bag

Curtain air bags are located along both sides of the roof rails above the front and rear doors.

They are designed to help protect the heads of the front seat occupants and the rear outboard seat occupants in certain side impact collisions.

The curtain air bags are designed to deploy during certain side impact collisions, depending on the crash severity of impact. However, when side deployment threshold is satisfied at front-impact, curtain air bags may deploy.

The curtain air bags may deploy on the side of the impact.

The curtain air bags are not designed to deploy in all side impacts situations.


Failure to follow the above instructions can result in injury or death to the vehicle occupants in an accident.

WARNING - No attaching objects

Why didn’t my air bag go off in a collision? (Inflation and non-inflation conditions of the air bag)

There are many types of accidents in which the air bag would not be expected to provide additional protection.

These include rear impacts, second or third collisions in multiple impact accidents, as well as low speed impacts.

Side air bag
Your vehicle is equipped with a side air bag in each front seat. The purpose of the air bag is to provide the vehicle's driver and/or the front passenger with additional protection than tha ...

Air bag collision sensors
(1) SRS control module (2) Front impact sensor (3) Side pressure sensor (if equipped) (4) Side impact sensor (if equipped) WARNING Do not hit or allow any objects to impact the locations whe ...

Other information:

Kia Niro (DE HEV) Owners Manual: Windows
(1) Driver’s door power window switch (2) Front passenger’s door power window switch (3) Rear door (left) power window switch (4) Rear door (right) power window switch (5) Window opening and closing (6) Automatic power window up*/ down* (7) Power window lock switch ✽ NOTICE In cold a ...

Kia Niro 2017 (DE HEV) Service Manual: Evaporator Core Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater and blower assembly. (Refer to Heater - "Heater Unit") 3. Remove the heater unit lower case (A) after loosening the mounting ...

© 2016-2018