Kia Niro: Crash Pad / Crash Pad Under Cover Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Remove the crash pad under cover [RH] (A) after loosening the mounting screws.

2.

Install in the reverse order of removal.

  

Make sure the connector is connected properly.

Replace any damaged clips.

Crash Pad Side Cover Repair procedures
Replacement    Put on gloves to protect your hands.    ...

Crach Pad Center Panel Components and components location
Component Location 1. Crash pad main lower panel ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Fly Wheel Repair procedures
Removal and Installation    • Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure to follow ...

Kia Niro 2017 (DE HEV) Service Manual: Seat Belt Buckle Switch (BS) Repair procedures
Removal 1. Disconnect the battery negative terminal, and wait for at least three minutes before beginning to work. 2. Remove the front seat assembly. (Refer to the Body - "Front seat") 3. Loosen the mou ...

© 2016-2020 www.kniro.net