Kia Niro: Hybrid Control System / Components and components location
| Components Location |
|
1. Hybrid Power Control Unit (HPCU) 2. Hybrid Control Unit (HCU) |
3. Brake Switch 4. DC Fuse |
HPCU includes the HCU (Hybrid Control Unit), Inverters (for Drive Motor, HSG and Electric A/C Compressor), MCU (Motor Control Unit) and LDC (Low DC / DC Converter). |
For the location of the other control modules, refer to the relevant group. |
|
1. Hybrid Power Control Unit (HPCU) 2. Hybrid Control Unit (HCU) |
3. Brake Switch |
|
|
|
|
4. DC Fuse |
|
|
|
Description and operation
Description
The HCU (Hybrid Control Unit) controls the overall hybrid systems and is connected
with each of the control modules (ECM, TCM, MCU, BMS, ECU, etc.) via CAN. The hybrid
sys ...
Other information:
Kia Niro (DE HEV) Owners Manual: If the engine will not start
If engine doesn't turn over or turns over slowly
1. If your vehicle has an dual clutch transmission, be sure the shift lever is
in N (Neutral) or P (Park) and the emergency brake is set.
2. Check the battery connections to be sure they are clean and tight.
3. Turn on the interior light. If ...
Kia Niro (DE HEV) Owners Manual: Interior light
When the interior light switch is in the DOOR position and all doors (and tailgate)
are locked and closed, the room lamp will come on for 30 seconds if any of the below
is performed.
Without smart key system
- When the door unlock button is pressed on the transmitter.
With the smart key ...