Kia Niro: High Voltage Battery Control System / Components and components location

Component Location

1. BMS ECU
2. Safety Plug
3. Main Relay (+)
4. Main Relay (-)
5. Pre-Charge Relay
6. Pre-Charge Resistor
7. Battery Current Sensor
8. Main Fuse [Safety Plug]
9. Battery Temperature Sensor
10. Battery Inlet Temperature Sensor

  

Main Relays (Positive, Negative), Pre-Charge Relay, Pre-Charge Resistor, and Battery Current Sensor are integrated into the PRA.

1. BMS ECU
2. Safety Plug

3. Main Relay (+)
4. Main Relay (-)
5. Pre-Charge Relay
6. Pre-Charge Resistor
7. Battery Current Sensor
8. Main Fuse [Safety Plug]

9. Battery Temperature Sensor
10. Battery Inlet Temperature Sensor


High Voltage Battery Control System
...

Description and operation
Description The high voltage battery system consists of the BMS ECU (Battery Management System ECU), Power Relay Assembly (PRA), safety plug, battery temperature sensor, and battery a ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Coolant Repair procedures
Refilling And Bleeding    Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure escaping from the radiator. ...

Kia Niro (DE HEV) Owners Manual: Air bag inflation conditions
Front air bags Front air bags are designed to inflate in a frontal collision depending on the severity of impact of the front collision. Side and curtain air bags Side and curtain air bags are designed to inflate when an impact is detected by side collision sensors depending on the severity o ...

© 2016-2020 www.kniro.net