Kia Niro: High Voltage Battery Control System / Components and components location
| Component Location |
|
1. BMS ECU 2. Safety Plug 3. Main Relay (+) 4. Main Relay (-) 5. Pre Charge Relay 6. Pre-Charge Resistor |
7. Battery Current Sensor 8. Main Fuse [Safety Plug] 9. Battery Temperature Sensor 10. Battery Inlet Temperature Sensor |
Main Relays (Positive, Negative), Pre-Charge Relay, Pre-Charge Resistor, and Battery Current Sensor are integrated into the PRA. |
|
1. BMS ECU |
2. Safety Plug |
|
|
|
|
3. Main Relay (+) 4. Main Relay (-) 5. Pre-Charge Relay 6. Pre-Charge Resistor 7. Battery Current Sensor |
8. Main Fuse [Safety Plug] |
|
|
|
|
9. Battery Temperature Sensor 10. Battery Inlet Temperature Sensor |
|
|
|
Description and operation
Description
The high voltage battery system consists of the BMS ECU (Battery Management System
ECU), Power Relay Assembly (PRA), safety plug, battery temperature sensor, and battery
a ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
General Inspection
Before and after servicing the EPS system, perform the troubleshooting and
test procedure as follows.
Compare the system condition with normal condition in the table below and
if abnormal symptom is detected, perform necessary remedy and inspe ...
Kia Niro 2017 (DE HEV) Service Manual: Height Adjuster Repair procedures
Replacement
1.
Remove the front seat belt upper anchor.
(Refer to Front Seat Belt - "Front Seat Belt Pretensioner")
2.
After loosening the mounting bolts, remove the height adjuster (A).
Tightening torque :
...