Kia Niro: Blind Spot Detection system (BSD) / Components and components location

Components

1. Blind Spot Detection (BSD) Unit
2. BSD switch
3. Speaker
4. BSD warning lamp
5. Cluster

Specifications
Specifications Items Specification Rated voltage DC 12 V Operating voltage 9 - 16 V ...

Description and operation
Description BSD is a system that uses two magnetic wave radar sensors attached on the rear panel to measure the distance from the vehicle in the back and senses and sets off (visu ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Troubleshooting
Troubleshooting Symptom Suspect Area Reference Lower pedal or spongy pedal 1. Integrated Brake Actuation Unit (Air in) air·bleed 2. AHB system (Fluid leaks) replace ...

Kia Niro (DE HEV) Owners Manual: Changing a tire with TPMS
If you have a flat tire, the low Tire Pressure and Position telltales will come on. We recommend that the system be checked by an authorized Kia dealer. CAUTION We recommend that you use the sealant approved by Kia. The sealant on the tire pressure sensor and wheel shall be eleminated when yo ...

© 2016-2020 www.kniro.net