Kia Niro: Fuel Delivery System / Components and components location

Components Location
[Fuel Tank Assembly]

1. Fuel Tank
2. Fuel Pump Assembly
3. Canister
4. Fuel Tank Air Filter
5. Fuel Tank Band
6. Fuel Filler Hose
7. Leveling Hose
8. Ventilation hose
9. Vapor Tube
10. Fuel Pump Plate Cover

[Fuel Pump Assembly]

1. Fuel Pressure Sensor (FPS)
2. Fuel Pressure Control Module (FPCM)
3. Head Assembly
4. Fuel Pump Motor
5. Fuel Filter
6. Fuel Pressure Regulator
7. Fuel Sender
8. Pre-filter
9. Reservoir Cup
10. Fuel Feed Tube
11. Fuel Feed Tube Port

[High Pressure Fuel Line]

1. High pressure fuel pump
2. High pressure fuel pipe
3. Delivery pipe
4. Injector

  

In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by leakage of the high pressure fuel. So don’t do any repair work right after engine stops.

Fuel Delivery System
...

Fuel pressure test (low pressure system)
Fuel Pressure Test (Low pressure system) 1. Release the residual pressure in fuel line. (Refer to the Fuel Delivery System - Inspection - "Release Residual Pre ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: General information
Important Safety Notice Proper service methods and repair procedures are essential for safe, reliable operation of all motor vehicles as well as personal safety of the operator. The service procedures and descriptions in this shop manual provide general directions for a service an ...

Kia Niro 2017 (DE HEV) Service Manual: Intake Actuator Repair procedures
Inspection 1. Switch "OFF" the ignition. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding termin ...

© 2016-2019 www.kniro.net