Kia Niro: Dual Clutch Transmission Control System / Clutch Actuator Assembly Specifications

Specifications
Item
Condition
Specification
Resistance (line to line)
Motor 1
57 mΩ ± 10 %
Motor 2
57 mΩ ± 10 %
Rated voltage
12 V
Operating condition
-40 to 257°F (- 40 to 125°C)

Clutch Actuator Assembly Components and components location
Components 1. Fork cover 2. Clutch actuator assembly 3. Extension connector 4. Motor 1 (Odd) 5. Motor 2 (Even) ...

Clutch Actuator Assembly Description and operation
Description The clutch actuator uses signals from the Transmission Control Module (TCM) to control the clutch. ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Electric EGR Control Valve Specifications
Specification [Motor] Item Specification Coil Resistance (Ω) 2.21 - 2.99 [20°C(68°F)] Pin 2 [Position sensor] Item Specification Sensor Po ...

Kia Niro 2017 (DE HEV) Service Manual: Blind Spot Detection Radar Calibration Description and operation
Description To correctly sense vehicles on the neighboring lanes using the radar, the direction of the sensor and the direction of the vehicle must be aligned. This is the BSD unit alignment. If this alignment is not performed as in illustration below, it may cause degradation of ...

© 2016-2020 www.kniro.net