Toyota Corolla: Child restraint systems / Child restraint system fixed with a child restraint LATCH anchor

Toyota Corolla 2019-2022 Owners Manual / For safety and security / Child safety / Child restraint systems / Child restraint system fixed with a child restraint LATCH anchor

■ Child restraint LATCH anchors

LATCH anchors are provided for the outboard rear seat. (Marks displaying the location of the anchors are attached to the seats.)

Toyota Corolla. Child restraint system fixed with a child restraint LATCH anchor

■ When installing in the rear outboard seats

Install the child restraint system in accordance to the operation manual enclosed with the child restraint system.

1. If the head restraint interferes with your child restraint system, and the head restraint can be removed, remove the head restraint. Otherwise, put the head restraint in the upper most position. (®P.136)

With flexible lower attachments

2. Remove the anchor covers, and install the child restraint system to the seat.

The bars are installed behind the anchor covers.

For owners in Canada:

The symbol on a child restraint system indicates A the presence of a lower connector system.

Toyota Corolla. Child restraint system fixed with a child restraint LATCH anchor

With rigid lower attachments

2. Remove the anchor covers, and install the child restraint system to the seat.

The bars are installed behind the anchor covers.

For owners in Canada: The symbol on a child restraint system indicates A the presence of a lower connector system.

Toyota Corolla. Child restraint system fixed with a child restraint LATCH anchor

3. If the child restraint has a top tether strap, follow the child restraint manufacturer’s operation manual regarding the installation, using the top tether strap to latch onto the top tether strap anchor. (®P.68)

4. After installing the child restraint system, rock it back and forth to ensure that it is installed securely.

■ When installing in the rear center seat

There are no LATCH anchors behind the rear center seat.

However, the inboard LATCH anchors of the outboard seats, which are 15.6 in. (396 mm) apart, can be used if the child restraint system manufacturer’s instructions permit use of those anchors with the anchor spacing stated.

Child restraint systems with rigid lower attachments cannot be installed in the center seat. This type of child restraint system can only be installed in the outboard seat.

■Laws and regulations pertaining to anchors

The LATCH system conforms to FMVSS225 or CMVSS210.2. Child restraint systems conforming to FMVSS213 or CMVSS213 specifications can be used. This vehicle is designed to conform to SAE J1819.

WARNING

■When installing a child restraint system

Observe the following precautions. Failure to do so may result in death or serious injury.

Child restraint system fixed with a seat belt
A child restraint system for a small child or baby must itself be properly restrained on the seat with the lap portion of the lap/shoulder belt. ■ Installing child restraint system using a seat bel ...

Child restraint system fixed with an ISOFIX lower anchorage
■ ISOFIX lower anchorages (ISOFIX child restraint system) Lower anchorages are provided for the outboard rear seats. (Marks displaying the location of the anchorages are attached to the seats.) ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: DCT(Dual Clutch Transmission) Components and components location
Components 1. Hybrid drive motor assembly 2. DCT (Dual Clutch Transmission) assembly 3. Gear actuator assembly 4. DCT support bracket 5. Inhibitor switch 6. Clutch actuator assembly 7. Dual clutch assembly 8. Engine clutch actuator as ...

Kia Niro 2017 (DE HEV) Service Manual: Hybrid Power Control Unit (HPCU) Components and components location
Components 1. Hybrid Control Unit(HCU) [HPCU] 2. Inverter [HPCU] 3. Low Voltage DC/DC Converter (LDC) [HPCU] 4. High voltage connector (↔ High voltage battery system assembly) 5. High voltage connector (↔ Hybrid drive motor assembly) 6. H ...

© 2016-2022 www.kniro.net