Peugeot 2008: In the event of a breakdown / Changing a bulb

Peugeot 2008. Changing a bulb In some weather conditions (e.g. low temperature or humidity), misting on the internal surface of the glass of the headlamps and rear lamps is normal, and will disappear after the lamps have been on for a few minutes.

Peugeot 2008. Changing a bulb Never look too closely at the luminous beam of LED or Full LED  technology  headlamps: risk of serious eye injury!

Peugeot 2008. Changing a bulb

Peugeot 2008. Changing a bulb The headlamps have polycarbonate lenses with a protective coating:

Peugeot 2008. Changing a bulb Changing a bulb must only be done with the ignition off and after the headlamp / lamp has been switched off for several minutes - risk of serious burns!

Do not touch the bulb directly with your fingers; use a lint-free cloth.

It is essential only to use anti-ultraviolet (UV) type bulbs, so as not to damage the headlamp.

Always replace a failed bulb with a new bulb of the same type and specification. To avoid lighting imbalance, replace the bulbs in pairs.

Peugeot 2008. Changing a bulb Refitting the lamp units

Perform the operations in the reverse order to dismantling.

Light-emitting diode (LED) headlamps and lamps

Depending on version, the affected types of headlamps / lamps are:

Peugeot 2008. Changing a bulb If you need to replace this type of bulb, you must contact a PEUGEOT dealer or a qualified workshop.

Do not touch LED or Full LED  technology headlamps - risk of electrocution!

Front lamps

Model with Full LED  technology  headlamps

Peugeot 2008. Changing a bulb

  1. Dipped beam headlamps / Main beam headlamps
  2. Direction indicators
  3. Sidelamps
  4. Daytime running lamps / Sidelamps
  5. Front foglamps

Model with LED  technology  headlamps

Peugeot 2008. Changing a bulb

  1. Main beam headlamps (LED)
  2. Dipped beam headlamps (LED)
  3. Daytime running lamps / Sidelamps  (LED)
  4. Direction indicators (PY21W amber).

Model with halogen headlamps

Peugeot 2008. Changing a bulb

  1. Main beam headlamps (H9)
  2. Dipped beam headlamps (H18)
  3. Daytime running lamps / Sidelamps  (LEDs)
  4. Direction indicators (PY21W amber).

Peugeot 2008. Changing a bulb Opening the bonnet / Accessing the bulbs

With the engine warm, proceed with caution - risk of burns!

Take care with objects or clothing that could be caught in the blades of the cooling fan - risk of strangulation!

Peugeot 2008. Changing a bulb

Peugeot 2008. Changing a bulb Halogen bulbs (Hx)

To ensure good quality lighting, check that the bulb is correctly positioned in its housing.

Main / Dipped beam headlamps

Peugeot 2008. Changing a bulb

Peugeot 2008. Changing a bulb

When refitting the bulb holder in its housing, press until you hear a click which means it is locked in place.

Direction indicators

Peugeot 2008. Changing a bulb Rapid flashing of a direction indicator lamp (left or right) indicates that one of the bulbs on the corresponding side has failed.

Peugeot 2008. Changing a bulb

Peugeot 2008. Changing a bulb Amber coloured bulbs must be replaced by bulbs with identical specifications and colour.

Rear lamps

Peugeot 2008. Changing a bulb

  1. Sidelamps / Daytime running lamps (LED)
  2. Brake lamps (LED)
  3. Reversing lamps  (LED)
  4. Direction indicators (LED)

Foglamps (P21W)

Peugeot 2008. Changing a bulb

These bulbs are replaced from outside the rear bumper.

Peugeot 2008. Changing a bulb To change the bulb within a few minutes of switching off the ignition, take care not to touch the exhaust - risk of burns!

Spare wheel
Scan the QR Code on page 3 to view explanatory videos. For more information on the Tool kit, refer to the corresponding section. Accessing the spare wheel The spare wheel is stored under the boot ...

Changing a fuse
Accessing the tools The extraction tweezers are located behind the fusebox cover. Depending on version: Unclip the cover by pulling at the top left, then right. Remove the cover completely. Take ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: TJ Joint Components and components location
Components [LH] 1. BJ assembly 2. BJ circlip 3. BJ boot band 4. BJ boot 5. Dynamic damper band 6. Dynamic damper 7. Shaft 8. TJ boot band 9. TJ boot 10. Spider assembly 11. Retainer ring 12. TJ hou ...

Kia Niro 2017 (DE HEV) Service Manual: Gear Actuator Assembly Description and operation
Description • The gear actuator comprises the shift motor and select solenoid. • Gear actuator shift motor and select solenoid use signals from TCM to control the gear. ...

© 2016-2021 www.kniro.net