Kia Niro: Hybrid Control System / Brake Switch Description and operation

Description

Installed on the brake pedal and linked with the HCU and the stop lamp, the brake switch sensors the status of the brake pedal (Release/Depress) and informs the HCU.

Brake Switch Specifications
Specification Item Brake pedal release Brake pedal depressed Switch 1 Max. 0.5V Battery Voltage ...

Brake Switch Schematic diagrams
Circuit Diagram ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Battery Repair procedures
Inspection Battery Voltage and Status Check the battery voltage and status using the battery tester. Battery Terminal 1. Move back and forth to check that the battery terminals (A) are loose or corroded.If the terminals are corroded, clean them. ...

Kia Niro (DE HEV) Owners Manual: Check tire pressure
You can check the tire pressure in the information mode on the cluster. - Refer to “User settings mode” in chapter 4. Tire pressure is displayed 1~2 minutes later after driving. If tire pressure is not displayed when the vehicle is stopped, “Drive to display” message displays. ...

© 2016-2019 www.kniro.net