Kia Niro: Assist emergency braking (AEB) / Brake operation
- In an urgent situation, the braking system enters into the ready status for prompt reaction against the driver’s depressing the brake pedal.
- The AEB provides additional braking power for optimum braking performance, when the driver depresses the brake pedal.
- The braking control is automatically deactivated, when the driver sharply depresses the brake pedal, or when the driver abruptly operates the steering wheel.
- The braking control is automatically canceled, when risk factors disappear.
CAUTION
The driver should always pay great caution to vehicle operation, even though there is no warning message or warning alarm.
WARNING
The AEB cannot avoid all collisions. The AEB might not completely stop the vehicle before collision, due to ambient, weather and road conditions. The driver has the responsibility to drive safely and control the vehicle.
WARNING
The AEB operates in accordance with the risk levels, such as the distance from the vehicle/passer- by in front, the speed of the vehicle/passer-by in front, and the driver's vehicle operation.
Emergency braking (3rd warning)
The warning message appears on the LCD display with the warning alarms.
The AEB controls the brakes within certain limit to release shock from the
collision.
The AEB controls the maximum ...
Sensor to detect the distance from the vehicle in front (front radar)
The sensor is to maintain a certain distance from the vehicle in front. However,
the smudged sensor lens with foreign substances, such as snow and rain, adversely
affects the sensing performance ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Steering Gear Rack, Linkage and Boots Repair procedures
Inspection
1.
Check the steering wheel free road.
(1)
Turn the steering wheel so that the front wheels can face straight
ahead.
(2)
Measure the distance the steering wheel can be turned without
...
Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Inspection
1.
After disconnecting the vapor hose from the PCV valve, remove the PCV
valve.
2.
Reconnect the PCV valve to the vapor hose.
3.
Run the engine at idle, then put a finger over the open end of the PCV
v ...