Kia Niro: Chassis / Brake Lines, Hoses and Connections Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Maintenance / Chassis / Brake Lines, Hoses and Connections Repair procedures

Inspection

Visually check for proper installation, chafing, cracks, deterioration and any leakage.

Replace any deteriorated or damaged parts immediately.

Brake/Clutch Fluid Repair procedures
Inspection Check the brake fluid level in the brake fluid reservoir. The level should be between “MIN” and “MAX” marks on the side of the reservoir. Use only hydraulic bra ...

Disc Brakes and Pads Repair procedures
Inspection Check the pads for excessive wear, discs for run out and wear, and calipers for fluid leakage. Front Brake Front brake disc thickness check 1. ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Crankshaft Position Sensor (CKPS) Troubleshooting
Signal Waveform This example shows a typical Crankshaft Position Sensor (CKPS) and Camshaft Position Sensor (CMPS) waveforms at idle. The PCM controls the injection and ignition timing by using these signals. Generally, the CKPS signal is used to detect the piston position whe ...

Kia Niro 2017 (DE HEV) Service Manual: Specifications
Specification Item Specification Power source 3 V Operating temperature -22 - 167°F (-30 - 75°C) RF Modulation FSK LF Modulation ASK ...

© 2016-2019 www.kniro.net