Kia Niro: Blower / Blower Unit Components and components location

Component Location

1. Blower unit assembly

Components

1. Blower Intake Seal
2. Intake Duct Case [Upper]
3. Intake Door Assembly
4. Intake Duct Case [Lower]
5. Air Filter Cover
6. Intake Actuator

7. Air Filter
8. Anti Noise Pad
9. Blower Case [Upper]
10. Cluster Ionizer
11. Blower Motor assembly

Replacement When prying with a flat-tip screwdriver or a prying trim tool, wrap a protective tape around the rela ...

Kia Niro 2017 (DE HEV) Service Manual: Rear Door Side Weatherstrip Repair procedures
Replacement 1. Loosen the rear door checker (B) mounting bolt. Tightening torque : 19.6 - 29.4 N·m (2.0 - 3.0 kgf·m,14.5 - 21.7 lb·ft) 2. Detach the clips, and remove the rear door side weather ...

Kia Niro 2017 (DE HEV) Service Manual: Power Door Lock Module Repair procedures
Inspection • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. • Wh ...