Kia Niro: Body Electrical System / Blind Spot Detection system (BSD)

Kia Niro 2017 (DE HEV) Service Manual / Body Electrical System / Blind Spot Detection system (BSD)

Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the glove box housing. (Refer to Body - "Glove Box Housing") ...

Specifications
Specifications Items Specification Rated voltage DC 12 V Operating voltage 9 - 16 V ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Headlamps Repair procedures
Inspection 1. Check the battery voltage. (Low beam will be on when the battery voltage is above 9 V.) 2. Check the fuse and relay. 3. Check the polarity of ballast. (The low beam will not light on in reverse pola ...

Kia Niro 2017 (DE HEV) Service Manual: Injector Troubleshooting
Signal Waveform The three waveforms below are taken from the #1 and #4 injectors. The top waveform is from the high side (feed side) of the #1 and #4 injectors, while the middle waveform is from the low side (ground side) of the #1 injector and the bottom waveform is from the low ...

© 2016-2019 www.kniro.net