Kia Niro: Charging System / Battery Sensor Specification

Specifications
Item
Specification
Rated Voltage (V)
12 - 14
Quiescent Current (uA)
175
Pin
2 (B+, LIN)

Auxiliary 12V Battery Repair procedures
Removal Auxiliary 12V Battery 1. Open the trunk. 2. Remove the luggage side trim [RH] side cover (A). 3. Turn t ...

Battery Sensor Description and operation
Description Vehicles have many control units that use more electricity. These units control their own system based on information from diverse sensors. It is important to have a stabl ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Cooling Fan Repair procedures
Removal and Installation Cooling Fan Assembly 1. Disconnect the negative battery terminal. 2. Remove the air cleaner and air duct A. (Refer to Intake and Exhaust System - "Air Cleaner") 3. Separate the engine c ...

Kia Niro 2017 (DE HEV) Service Manual: Side Impact Sensor (SIS) Description and operation
Description • Side Impact Sensor (SIS) system consists of two Pressure Side Impact Sensor (P-SIS) which are installed at each center of the front door module (LH and RH) and two SIS which are installed at each center pillar nearby (LH and RH) and two rear SI ...

© 2016-2018 www.kniro.net