Kia Niro: Charging System / Battery Sensor Description and operation

Description

Vehicles have many control units that use more electricity. These units control their own system based on information from diverse sensors. It is important to have a stable power supply as there diverse sensors giving a variety of information. Battery sensor (A) is mounted on battery (-) terminal. It transmits battery voltage, current, temperature information to ECM. ECM controls generating voltage by duty cycle based on these signals.

Battery Sensor Description and operation
Description Vehicles have many control units that use more electricity. These units control their own system based on information from diverse sensors. It is important to have a stabl ...

Battery Sensor Repair procedures
Removal 1. Open the trunk. 2. Remove the luggage side trim [RH]. (Refer to Body - "Luggage Side Trim") 3. ...

Other information:

Kia Niro (DE HEV) Owners Manual: Fuses
A vehicle’s electrical system is protected from electrical overload damage by fuses. This vehicle has 2 (or 3) fuse panels, one located in the driver’s side panel bolster, the others in the engine compartment near the battery. If any of your vehicle’s lights, accessories, or controls d ...

Kia Niro 2017 (DE HEV) Service Manual: Side Impact Sensor (SIS) Description and operation
Description • Side Impact Sensor (SIS) system consists of two Pressure Side Impact Sensor (P-SIS) which are installed at each center of the front door module (LH and RH) and two SIS which are installed at each center pillar nearby (LH and RH) and two rear SI ...

© 2016-2020 www.kniro.net