Kia Niro: Air Conditioning System / Auto Defogging Sensor Repair procedures

Replacement
1.

Disconnect the negative (-) battery terminal.

2.

Remove the auto defogging sensor cover (A).

3.

Using a screwdriver or a remover, remove the LDWS & rain sensor cover (A).

4.

Remove the auto defogging sensor connector (B) and the auto defogging sensor (A).

5.

Install in the reverse order of removal.

Auto Defogging Sensor Description and operation
Description Installed on the windshield glass, the auto defogging sensor detects humidity to blow out wind for defogging to improve visibility and driver comfort. The air conditioner ...

Duct Sensor Repair procedures
Inspection 1. Check that the voltage between No. 1 and 2 duct sensors change. 1. Sensor (+ 5V) 2. Sensor ground ...

Other information:

Kia Niro (DE HEV) Owners Manual: Owner maintenance precautions
Improper or incomplete service may result in problems. This section gives instructions only for the maintenance items that are easy to perform. ✽ NOTICE Improper owner maintenance during the warranty period may affect warranty coverage. For details, read the separate Warranty & Maintenan ...

Kia Niro 2017 (DE HEV) Service Manual: Crankshaft Position Sensor (CKPS) Repair procedures
Inspection 1. Check signal waveform of CKPS and CMPS using a KDS/GDS. Specification: Refer to “Waveform” Removal 1. Switch "OFF" the ignition and disconnect the negative (-) batte ...

© 2016-2024 www.kniro.net