Kia Niro: Immobilizer System / Antenna Coil Repair procedures

Removal
1.

Disconnect the negative (-) battery terminal.

2.

Remove the crash pad lower panel.

(Refer to Body - "Crash Pad Lower Panel")

3.

Remove the steering column upper and lower shroud panel.

(Refer to Body - "Steering Column Shroud Panel")

4.

Disconnect the 6P connector (A) of the coil antenna and then remove the antenna coil (B) after loosening a screw.

Installation
1.

Install the coil antenna and connect the 6P connector.

2.

Install the steering column upper and lower shroud panel.

3.

Install the crash pad lower panel.

4.

Connect the negative (-) battery terminal.

Immobilizer Control Unit Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the main crash pad assembly. (Refer to Body - "Main Crash Pad Assembly ...

Indicators And Gauges
...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Coolant Repair procedures
Refilling And Bleeding    Never remove the cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure escaping from the reservoir.    ...

Kia Niro 2017 (DE HEV) Service Manual: Fuel Pressure Sensor (FPS) Specifications
Specification Pressure [kPa (kgf/cm², psi)] Output Voltage (V) [Vref = 5V] 50 (0.51, 7.3) 0.3 600 (6.12, 87.0) 2.5 1100 (11.2, 159.5) 4.5 ...

© 2016-2019 www.kniro.net