Kia Niro: System operation / Air conditioning

Kia air conditioning systems are filled with R-134a or R-1234yf refrigerant.

1. Start the engine. Push the air conditioning button.

2. Set the mode to the position.

3. Set the air intake control to the outside air or recirculated air position.

4. Adjust the fan speed control and temperature control to maintain maximum comfort.

Your vehicle is filled with R-134a or R-1234yf according to the regulation in your country at the time of production. You can find out which air conditioning refrigerant is applied to your vehicle on the label located inside of the hood. Refer to chapter 9 for the location of the air conditioning refrigerant label.

CAUTION

✽ NOTICE

Operation Tips
To keep dust or unpleasant fumes from entering the vehicle through the ventilation system, temporarily set the air intake control to the recirculated air position. Be sure to return the contr ...

Air conditioning system operation tips
If the vehicle has been parked in direct sunlight during hot weather, open the windows for a short time to let the hot air inside the vehicle escape. Use air conditioning to reduce humidity an ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Hybrid Drive Motor Assembly Specification
Specification Item Specification Type PMSM (Interior Permanent Magnet Synchronous Motor) Max. output 32 kW / 1,798 - 2,500 rpm Max. torque 170 N·m / 0 - 1798 rpm ...

Kia Niro 2017 (DE HEV) Service Manual: Rear Door Side Weatherstrip Repair procedures
Replacement 1. Loosen the rear door checker (B) mounting bolt. Tightening torque : 19.6 - 29.4 N·m (2.0 - 3.0 kgf·m,14.5 - 21.7 lb·ft) 2. Detach the clips, and remove the rear door side weather ...

© 2016-2021 www.kniro.net