Peugeot 2008: Driving / Adaptive Cruise Control

Peugeot 2008 2019-2021 Owner's Manual / Driving / Adaptive Cruise Control

Refer to the General recommendations on the use of driving and manoeuvring aids and to Cruise control - particular recommendations.

This system automatically maintains the speed of your vehicle at a value which you set (speed setting), while keeping a safe distance from the vehicle in front (target vehicle), and which has been set beforehand by the driver. The system automatically manages the acceleration and deceleration of the vehicle.

With the Stop  & Go function, the system manages the braking until the vehicle comes to a complete stop and the restarting of the vehicle.

Peugeot 2008. Adaptive Cruise Control The brake lamps come on if the vehicle is slowed down by the system.

It can be dangerous to drive if the brake lamps are not in perfect working order.

Peugeot 2008. Adaptive Cruise Control

To do so, it has a camera located at the top of the windscreen and, depending on version, a radar located in the front bumper.

Peugeot 2008. Adaptive Cruise Control Primarily designed for driving on main roads and motorways, this system only works with moving vehicles driving in the same direction as your vehicle.

Peugeot 2008. Adaptive Cruise Control If the driver operates a direction indicator to overtake a slower vehicle, the cruise control allows the vehicle to temporarily approach the vehicle in front to assist the overtaking manoeuvre, without ever exceeding the speed setting.

Peugeot 2008. Adaptive Cruise Control Some vehicles present on the road may not be properly seen or may be poorly interpreted by the camera and/or radar (e.g. a lorry), which may lead to a poor assessment of the distances and lead to the vehicle inappropriately accelerating or braking.

Steering mounted control

Peugeot 2008. Adaptive Cruise Control

  1. ON (CRUISE position) / OFF
  2. Activation of cruise control at the current speed / decrease speed setting
  3. Activation of cruise control at the current speed / increase speed setting
  4. Pause / resume cruise control with the speed setting previously saved

    Confirmation of the restarting of the vehicle after automatic stop (versions with Stop & Go function)

  5. Use the speed suggested by the Speed Limit Recognition and Recommendation (MEM display)
  6. Display and adjustment of the distance setting to the vehicle in front

Use

Activating the system (pause)

Switching on cruise control and setting the speed

With a manual gearbox, your speed must be between 19 and 112  mph (30 and 180  km/h).

With an EAT8 automatic gearbox or a drive selector, your speed must be between 0 and 112  mph (0  and 180  km/h).

Peugeot 2008. Adaptive Cruise Control Pressing and holding button 2 or 3  results in a rapid change in the speed of the vehicle.

Pausing / resumption of cruise control

With an EAT8 gearbox or a drive selector, following braking that has brought the vehicle to a complete stop, if the traffic conditions do not allow the vehicle to begin moving again within 3  seconds of stopping, press button 4 or the accelerator pedal to move off.

If the driver takes no action after the vehicle has been stopped, the electric parking brake is applied automatically after about 5 minutes.

Peugeot 2008. Adaptive Cruise Control Cruise control remains active after changing gear, regardless of the gearbox type.

Peugeot 2008. Adaptive Cruise Control When the driver attempts to reactivate cruise control, after the function has been paused, the message "Activation not possible, unsuitable conditions" is briefly displayed if reactivation is not possible (safety conditions not met).

Changing the programmed speed setting with the Speed Limit Recognition and Recommendation function

Peugeot 2008. Adaptive Cruise Control To prevent sudden acceleration or deceleration of the vehicle, select a speed setting relatively close to the vehicle's current speed.

Changing the inter-vehicle distance

After a few seconds, the option is accepted and will be memorised when the ignition is switched off.

Temporarily exceeding the speed setting

Deactivating the system

Information displayed on the instrument panel

Peugeot 2008. Adaptive Cruise Control

  1. Vehicle detected by the system (full symbol)
  2. Cruise control active (colour not grey)
  3. Speed setting value
  4. Speed suggested by the Speed Limit Recognition and Recommendation
  5. Vehicle held stationary (versions with automatic gearbox or drive selector)

Peugeot 2008. Adaptive Cruise Control

  1. Inter-vehicle distance setting
  2. Position of the vehicle detected by the system

Messages and alerts

Peugeot 2008. Adaptive Cruise Control The display of these messages or alerts is not sequential.

Peugeot 2008. Adaptive Cruise Control "Cruise control paused" or "Cruise control suspended" following a brief acceleration by the driver.

Peugeot 2008. Adaptive Cruise Control "Cruise control active", no vehicle detected.

Peugeot 2008. Adaptive Cruise Control "Cruise control paused", vehicle detected.

Peugeot 2008. Adaptive Cruise Control "Cruise control active", vehicle detected.

Peugeot 2008. Adaptive Cruise Control "Take back control" (orange).

Peugeot 2008. Adaptive Cruise Control "Take back control" (red).

Peugeot 2008. Adaptive Cruise Control "Activation not possible, conditions unsuitable". The system refuses to activate cruise control, as the necessary conditions are not fulfilled.

Stop & Go function

Peugeot 2008. Adaptive Cruise Control "To move off again, press the accelerator pedal or press the  II  button” (button 4).

The system has brought the vehicle to a complete stop.

Within 3 seconds, the vehicle gradually and automatically begins moving again.

After 3 seconds, the driver must accelerate or press button 4 to move off again.

Peugeot 2008. Adaptive Cruise Control While the vehicle is immobilised, the following recommendations apply:

Peugeot 2008. Adaptive Cruise Control When moving off again, watch out for cyclists, pedestrians and animals, as they may not be detected properly.

Operating limits

Cruise control operates by day and night, in fog or moderate rainfall.

Certain situations cannot be managed by the system and require driver intervention.

Elements not detected by the system:

Peugeot 2008. Adaptive Cruise Control

Situations in which the driver must pause the cruise control system:

Peugeot 2008. Adaptive Cruise Control

Peugeot 2008. Adaptive Cruise Control

Reactivate cruise control when conditions permit.

Situations in which the driver is prompted to immediately resume control:

Peugeot 2008. Adaptive Cruise Control

Peugeot 2008. Adaptive Cruise Control Pay particular attention:

Peugeot 2008. Adaptive Cruise Control If any of the following malfunctions occurs, do not use the system:

Peugeot 2008. Adaptive Cruise Control If the vehicle has undergone any of the following modifications, do not use the system:

Drive Assist Plus
Only available on versions with the EAT8 automatic gearbox and gear selector. This system automatically adjusts the speed and corrects the trajectory, using the Adaptive Cruise Control with Stop  ...

Active Lane Keeping Assist
Refer to the General recommendations on the use of driving and manoeuvring aids. Using a camera located at the top of the windscreen, the system identifies lane markings and steers the vehicle insi ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Instrument Cluster Schematic diagrams
Circuit Diagram [General Standard] [General Supervision] ...

Kia Niro 2017 (DE HEV) Service Manual: Power Seat Motor Repair procedures
Inspection Power Seat Motor 1. Disconnect the connectors for each motor. [Slide motor (A)] [Rear height motor (B)] [Front tilt motor (C)] [Reclining motor (D)] [Lumber support motor (E)] ...

© 2016-2021 www.kniro.net