Toyota Corolla: Automatic High Beam / Activating the Automatic High Beam

1 Press the Automatic High Beam switch.

Toyota Corolla. Activating the Automatic High Beam

2 Push the lever away from you with the headlight switch in the Toyota Corolla. Activating the Automatic High Beam or Toyota Corolla. Activating the Automatic High Beam position.

The Automatic High Beam indicator will come on when the system is operating.

Toyota Corolla. Activating the Automatic High Beam

■Conditions to turn the high beams on/off automatically

■Camera sensor detection information

■Temporarily lowering sensor sensitivity

The sensitivity of the sensor can be temporarily lowered.

1 Turn the engine switch off while the following conditions are met.

2 Turn the engine switch to ON.

3 Within 60 seconds after step 2, repeat pulling the headlight switch lever to the original position then pushing it to the high beam position quickly 10 times, then leave the lever in high beam position.

4 If the sensitivity is changed, the Automatic High Beam indicator is turn on and off 3 times.

Automatic High Beam (headlights) may turn on even when the vehicle is stopped.

Automatic High Beam
The Automatic High Beam uses a camera sensor located behind the upper portion of the windshield to assess the brightness of the lights of vehicles ahead, streetlights, etc., and automatically turns ...

Turning the high beams on/off manually
■ Switching to the low beams Pull the lever to its original position. The Automatic High Beam indicator will turn off. Push the lever away from you to activate the Automatic High Beam system again. ...

Other information:

Peugeot 2008 2019-2022 Owner's Manual: Speed limiter
Refer to the General recommendations on the use of driving and manoeuvring aids. This system prevents the vehicle from exceeding the speed programmed by the driver (speed setting). The speed limiter is switched on manually. The minimum speed setting is 19 mph (30  km/h). The speed setting re ...

Peugeot 2008 2019-2022 Owner's Manual: Installing child seats
In compliance with European regulations, this table indicates the possibilities for installing child seats secured using the seat belt and universally approved (a) as well as the largest ISOFIX and i-Size for the seat positions fitted with ISOFIX anchoring points in the vehicle. Rules: A posi ...

© 2016-2022 www.kniro.net